How It Is Done
A bone scan is usually done by a nuclear medicine technologist. The
scan pictures are usually interpreted by a
radiologist or
nuclear medicine specialist.
You will need to remove any jewelry that might interfere with the
scan. You may need to take off all or most of your clothes, depending on which
area is being examined (you may be allowed to keep on your underwear if it does
not interfere with the test). You will be given a cloth or paper covering to
use during the test.
The technologist cleans the site on your arm where the radioactive
tracer will be injected. A small amount of the radioactive tracer is then
injected.
It takes 1 to 3 hours for the tracer to have enough tracer in lthem
for pictures to be taken with the gamma camera. During this time you may be
asked to drink 4 to 6 glasses of water to help eliminate in your urine any of
the radioactive substance that does not collect in your bones. Just before the
scan begins, you will usually be asked to empty your bladder to prevent any
radioactive urine from blocking the view of your pelvic bones during the
scan.
You will lie on your back on a table and a large scanning camera
will be positioned closely above you. It may move slowly above and around your
body, scanning for radiation released by the tracer and producing pictures as
the tracer moves into your bones. The camera does not produce any radiation, so
you are not exposed to any additional radiation while the scan is being
done.
You may be asked to move into different positions so the area of
interest can be viewed from other angles. You need to lie very still during
each scan to avoid blurring the pictures.
A bone scan takes about 1 hour.