How It Is Done
An arthrogram is usually done by a doctor who specializes in
interpreting X-rays (radiologist).
You will be asked to remove any jewelry or metal objects from the
joint area. You will then sit or lie down with your joint under an X-ray viewer
(fluoroscope) that is hooked to a video screen that can
show X-ray pictures. The skin over your joint is cleaned with a special soap
and draped with sterile towels. A
local anesthetic is used to numb the skin
and tissues over the joint.
A needle is put into your joint area. Joint fluid may be removed so
that more dye or air can be put into your joint. A sample of your joint fluid
may be sent to a lab to be looked at under a microscope. The fluoroscope shows
that the needle is placed correctly in your joint. The dye or air is then put
through the needle into your joint. Your joint may be injected with both dye
and air (double-contrast arthrogram). The needle is then removed.
You may be asked to move your joint around to help the dye or air
spread inside your joint. Pictures from the fluoroscope show if
the dye has filled your entire joint. Hold as still as possible while the
X-rays are being taken unless your doctor tells you to move your joint through
its entire
range of motion. The X-rays need to be taken quickly,
before the dye spreads to other tissues around your joint.
If you are having a CT scan or MRI after an arthrogram, a small
amount of a medicine called epinephrine may be mixed with the dye to stop the
dye from spreading into other tissues.
An arthrogram usually takes about 30 to 60 minutes.
After the arthrogram, rest your joint for about 12 hours. Do not do
any strenuous activity for 1 to 2 days. Use ice for any swelling and use pain
medicine for any pain. If a bandage or wrap is put on your joint following an
arthrogram, you will be told how long to use it.